General Category > PC Upgrade and Repair
PC Issues - Again
butt:
--- Quote from: SicSS on March 23, 2012, 11:31:11 AM ---im i reading that right that the ram is set at .7500V???
it should be on the DDR3 card at what voltage it should run at i believe.. dont have one in front of me to verify.
--- End quote ---
I see it at 1.5000 seen here:
DRAM voltage. Isnt that right?
What I dont understand is why I am seeing 667 mhz?
seen here:
butt:
^ Windows 7 - 64
Only have one 4G stick of ram installed right now. Checking the ram to see if I have a bad stick.
tarsier:
Not sure, cause I can't see the screen shots, but ddr3 is seen by most bios settings, as well as cpu-z, as 1/2 it's speed.
My ddr3 1600 is seen as 800mhz.
Butt, do you have full system specs up anywhere? I want to do a little research on the components you're running.
board, ram, cpu, psu, etc...
butt:
--- Quote from: tarsier on March 23, 2012, 12:52:16 PM ---
board, ram, cpu, psu, etc...
--- End quote ---
mobo
MSI P67s-c43
http://us.msi.com/product/mb/P67S-C43--B3-.html
cpu
i5-2500k
http://ark.intel.com/products/52210/Intel-Core-i5-2500K-Processor-(6M-Cache-3_30-GHz)?wapkw=2500k
psu
OCZGXS850
http://www.ocztechnology.com/ocz-gamexstream-850w-power-supply-eol.html
RAM
2x4G kit
Patriot
PC3 - 12800
1600MHz
http://www.patriotmemory.com/products/detailp.jsp?prodline=5&catid=34&prodgroupid=196&id=1049&type=1
GPU
Power Color
Radeon HD 6850
http://www.powercolor.com/Global/products_features.asp?id=273
Thanks ;D
tarsier:
Saw this looking up your power supply: http://www.tomshardware.com/forum/292508-28-computer-rebooting-plug-pulled-voltages
Nothing major on the motherboard though.
Do you have an extra power supply you can swap?
Here's some more info: http://www.techsupportforum.com/forums/f210/power-supply-information-and-selection-192217.html
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version